NETGEAR WNDR4500v2 User Manual page 102

host name that you configure in the router. Then, whenever your ISP-assigned IP address
changes, your router automatically contacts the Dynamic DNS service provider, logs in to
your account, and registers your new IP address. If your host name is hostname, for
example, you can reach your router at http://hostname.dyndns.org.
On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following
screen:
Figure 9. Forward traffic to a changing IP address

To set up Dynamic DNS:
Register for an account with one of the Dynamic DNS service providers whose web
1.
addresses are in the Service Provider list.
Select the Use a Dynamic DNS Service check box.
2.
Select the URL of your Dynamic DNS service provider.
3.
For example, for DynDNS.org, select www.dyndns.org.
Type the host name (or domain name) that your Dynamic DNS service provider gave you.
4.
Type the user name for your Dynamic DNS account. This is the name that you use to log in
5.
to your account, not your host name.
Type the password (or key) for your Dynamic DNS account.
6.
Click Apply to save your configuration.
7.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Advanced Settings
102