Connect To The Usb Drive From A Remote Computer; Access The Router's Usb Drive Remotely Using Ftp - NETGEAR WNDR4500v2 User Manual

Click the Approved Devices button.
2.
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
To add an approved USB device, select it from the Available USB Devices list and click Add.
3.
Select the Allow only approved devices check box.
4.
Click Apply so that your change takes effect.
5.
If you want to work with another USB device, first, click the Safely Remove USB Device
button for the currently connected USB device. Connect the other USB device, and repeat
this process.

Connect to the USB Drive from a Remote Computer

To connect to the USB drive from remote computers with a web browser, you have to use the
router's Internet port IP address. If you are using Dynamic DNS, you can type the DNS name,
rather than the IP address. You can view the router's Internet IP address from the dashboard
on the Basic Home screen or the Advanced Home screen.

Access the Router's USB Drive Remotely Using FTP


To connect to the router's USB drive using a web browser:
Connect to the router by typing ftp:// and the Internet port IP address in the address
1.
field of Internet Explorer or Netscape Navigator, for example:
ftp://10.1.65.4
If you are using Dynamic DNS, you can type the DNS name, rather than the IP address.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
USB Storage
54