Upgrade The Router Firmware - NETGEAR WNDR4500v2 User Manual

Upgrade the Router Firmware

The router firmware (routing software) is stored in flash memory. You can update the
firmware from the Administration menu on the Advanced tab. You might see a message at
the top of the NETGEAR genie screens when new firmware is available for your product.
You can use the Check button on the Router Upgrade screen to check and update to the
latest firmware for your product if new firmware is available.

To check for new firmware and update your router:
Select Advanced > Administration > Router Update:
1.
Click Check.
2.
The router finds new firmware if any is available.
Click Yes to update and locate the firmware (the file ends in .img).
3.
WARNING:
When uploading firmware to the router, do not interrupt the web
browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it could corrupt the firmware.
When the upload is complete, your router restarts. The upgrade process typically takes
about 1 minute. Read the new firmware release notes to determine whether you need to
reconfigure the router after upgrading.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Administration
77
Click
Check