Selecting Finishing Settings - Konica Minolta FS-505 User Manual

Copy operations
2 Copy operations
2.1

Selecting finishing settings

Various settings are available for sorting and finishing copies when they are
fed into the copy exit tray.
Note
As the default setting, "Group" is selected.
!
Detail
If the orientation of the positioned original is different from the orientation
of the paper in the paper tray, specify the position of the binding margin
of the original if hole punching or stapling are to be performed.
For details on specifying the position of the binding margin for the
original, refer to Copy Operations of the user manual.
For details on specifying the position of the binding margin, refer to Copy
Operations of the user manual.
If cover sheet feeder PI-501 is installed onto finisher FS-505, the finisher
can be operated manually. For details, refer to "Using finisher manually"
on page 2-19.
Finisher FS-505
2
2-3