Konica Minolta FS-505 User Manual page 13

Machine overview
No. Part name
1 Main body
2 Cover sheet feeder PI-501
3 Punch kit PK-504/PK-505
4 Finisher FS-505
5 Z-folding unit ZU-601/ZU-602
6 Large capacity tray LU-402
7 Large capacity tray LU-401
8 Hard disk drive HD-503
9 Printer controller IC-202
Finisher FS-505
Description
The original is scanned by the scanner section, and
the scanned image is printed by the printer section.
Referred to as the "machine" or "main body"
throughout the manual.
Allows cover sheets to be inserted into copies if in-
stalled onto finisher FS-505, and allows the func-
tions of installed finishers to be used manually
Allows hole punching to be used if installed onto fin-
isher FS-505
Referred to as the "punch kit" throughout the man-
ual.
Feeds out printed pages. The "Sort", "Group", "Off-
set" + "Sort", "Offset" + "Group", "Face Up" and
Staple settings are available.
Allows holes to be punched for filing and allows
pages to be folded in a zigzag if installed onto fin-
isher FS-505
Can be loaded with up to 4,000 sheets of paper (80
2
g/m )
Referred to as the "LCT" throughout the manual.
Can be loaded with up to 4,000 sheets of paper (80
2
g/m )
Referred to as the "LCT" throughout the manual.
Increases the number of original pages that can be
stored and enables the "Set Numbering" and Box
functions to be used
Referred to as the "hard disk" or "HDD" throughout
the manual.
Allows this machine to be used as a network printer
(optional)
1
1-9