Using Finisher Manually - Konica Minolta FS-505 User Manual

Copy operations
2.3

Using finisher manually

The Finisher FS-505 with Cover Sheet Feeder PI-501 installed can be
operated manually, using the operation panel provided on the Cover Sheet
Feeder.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are
described below.
- Finisher FS-505 + Cover Sheet Feeder PI-501
– Staple (Corner staple / 2 position staples)
- Finisher FS-505 + Cover Sheet Feeder PI-501 + Punch kit PK-504/505
– Staple (Corner staple / 2 position staples)
– Punch
Reminder
The Z folding unit ZU-601/602 cannot be used for manual punch. To use
Punch mode manually, Punch kit PK-504/505 is necessary.
Specifications
for Staple (Cor-
ner staple / 2 po-
sition staples)
Specifications
for Punch
Corner staple
Finisher FS-505
Paper size
A3, B4, A4, A4R, B5, A5, 11"×17",
8.5"×14", 8.5"×11", 8.5"×11"R (60 to
2
80 g/m )
2
A3 to A5 (60 to 128 g/m
2 position staples
Staple capacity
50 sheets or less
) 200 sheets or
less
Punch
2
Output tray
Primary (main)
tray
Primary (main)
tray
Start/Stop button
2-19