To Punch Holes In Copies - Konica Minolta FS-505 User Manual

2
The procedure for selecting two punched holes is described below.
When Finisher FS-505 and Punch PK-504/PK-505 are installed
When Finisher FS-505 and Z-folding unit ZU-601/ZU-602 are installed
Paper weight
2
50g/m to 128g/ m

To punch holes in copies

1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [2-Hole] or [4holes].
– To separate each set of pages and punch them, touch [Offset]. To
cancel the setting, touch [Offset] again to deselect it.
– To cancel the Punch setting, touch [2-Hole] or [4holes] again to
deselect it.
– To cancel changes to the settings, touch [Cancel].
2-14
Paper size
2
A3 w, B4 w, A4 w, A4 v, B5 w, B5 v, A5 w, A5 v, Foolscap
Copy operations
Finisher FS-505