Table of Contents
Advertisement
Copy operations
3
Touch [Position], and then touch the button for the desired position.
–
Touch [Auto] to automatically determine the position of the
punched holes according to the orientation of the positioned
original. If the original length is 297 mm or less, the holes are
punched along the long side of the paper. If the original length is
more than 297 mm, the holes are punched along the short side of
the paper.
–
To cancel changes to the punched hole position, touch [Cancel].
4
Touch [OK] twice.
The Basic screen appears again.
Finisher FS-505
2
2-15
Advertisement
Table of Contents
