Table of Contents
Advertisement
Scan to PC operations
4.3
Entering an address
The address of a recipient not registered in a one-touch dial button can be
entered directly to be specified.
Note
If software switch settings were specified to limit dialing, data cannot be
saved by directly typing in the address. For details on the software switch
settings, refer to "Specifying software switch settings (machine
functions)" on page 8-11.
To enter an address
1
Position the document to be scanned.
2
Press the [Fax/Scan] key.
3
Touch [Direct Input].
4
Select the communication mode.
Touch [Change Comm. Mode].
bizhub 350/250 (Phase 2.5)
4
4-11
Advertisement
Table of Contents
