Table of Contents
Advertisement
3
5
Touch the one-touch dial button to
be programmed.
–
Touch an index tab or touch
[Index List], and then touch the
desired one-touch dial button.
6
Type in the program name that will
appear on the one-touch dial button,
and then touch [Next].
–
The program name can contain
up to 12 characters.
–
If the optional fax kit has been
installed, touch [Next] to display a
screen for selecting a program.
Select the desired program, and
then touch [Next].
7
Specify the recipient.
–
To specify a recipient with a one-
touch dial button, touch [One-
Touch], touch a one-touch dial
button to select a recipient, and
then touch [Enter].
–
To search for a one-touch dial
button, touch [Search], specify
the recipient, and then touch
[Enter].
–
If no recipient is to be registered, touch [No Destination].
8
Touch [Next].
9
Touch [Transmission Setting].
3-42
IP address faxing
bizhub 350/250 (Phase 2.5)
Advertisement
Table of Contents
