Hard Disk Management - Kyocera Mita KM-7530 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

6. Hard disk management

Perform the following procedure to access the "Storage Management"
screen and check available space on the hard disk and/or delete any
invalid data.
1 With the content of the "Basic" tab displayed, press the [ ]
key. The "Default setting" screen will be displayed.
2 Touch the "BOX Management"["Hard Disk Management"] key.
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
7-74
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
report
Week
Language Management
timer
Bypass
Hard Disk
setting Management
Print
report
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is "6300" and
for 75 cpm copiers is "7500". If the entered code matched
the registered one, the "HDD Management mode" ["HDD
Management"] screen will be displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
4 Touch the "On" key under "Check HDD capacity" (left side of
End
the touch panel). The overall size of the hard disk, as well
as the currently available space, will be displayed. If you
want to delete any invalid data, go to the next step. If you
are finished with this procedure, go directly to step 6.
Inch specifications
HDD management mode
HDD management mode
Check HDD capacity
Able to check the free space and capacity
End
of HDD.
Default setting
Metric specifications
HDD management mode
HDD management
Check HDD capacity
Able to check the free space and capacity
of HDD.
Default setting
Delete invalid data
Delete invalid deta from the HDD.
On
Delete invalid data
Delete invalid deta from the HDD.
On
Close
Close
Close
On
Close
On