Accessing The Machine Default Settings - Kyocera Mita KM-7530 Operation Manual

(2) Accessing the machine default settings

Perform the following procedure when you want to access the
screens for each of the various machine default settings.
1 With the content of the "Basic" tab displayed, press the [ ]
key.
The "Default setting" screen will be displayed.
2 Touch the "Machine default" key on the left side of the touch
panel.
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is "6300" and
for 75 cpm copiers is "7500".
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
report
Week
Language Management
timer
Bypass
Hard Disk
setting
Management
Print
report
Close
Close
Section 7 COPIER MANAGEMENT FUNCTIONS
4 If the entered code matched the registered one, the
"Machine default" screen will be displayed.
Inch specifications
Default setting
Machine default
Auto drawer switching
Paper size(2nd drawer)
Paper size(3rd drawer)
Paper type(1st drawer)
Paper type(2nd drawer)
Default setting
Metric specifications
Default setting
Machine default
Auto cassette switching
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper type (1st cassette)
Paper type (2nd cassette)
Default setting
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-34.)
• Refer to the desired procedure(s) explained under "(3) Making
machine default settings" and perform the corresponding setting(s).
End
End
Default menu Setting mode
On / All types of paper
Auto / Inch
Auto / Inch
Plain
Plain
Default menu Setting mode
On / All types of paper
A4
A4
Plain
Plain
Close
Up
Down
Change #
Close
Up
Down
Change #
7-21