Table of Contents
Advertisement
Section 7 COPIER MANAGEMENT FUNCTIONS
3
Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is "6300" and
for 75 cpm copiers is "7500". If the entered code matched
the registered one, the "Weekly timer" ["Week timer"] screen
will be displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
4
Touch the key that corresponds to the desired weekly timer
setting.
Inch specifications
Weekly timer
Weekly timer
Day of the week
Setting mode
Monday
08:30-ON 19:45-OFF
Tuesday
00:00-ON
Wednesday
03:00-OFF
Thursday
08:30-ON 19:45-OFF
Friday
All day-OFF
Default setting
Metric specifications
Week timer
Week timer
Day of the week
Setting mode
MondayTUESDAY
08:30-ON 19:45-OFF
Tuesday
08:30-ON 19:45-OFF
Wednesday
08:30-ON 19:45-OFF
Thursday
08:30-ON 19:45-OFF
Friday
All day-OFF
Default setting
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-34.)
• Refer to the desired procedure(s) explained under "(3) Making
weekly timer settings" and perform the corresponding setting(s).
7-15
Close
Close
Close
Weekly timer
Up
Down
Off
Change #
On
Close
Week timer
Up
Down
Off
Change #
On
(3) Making weekly timer settings
Perform the following procedure that corresponds to the desired
setting.
● Programming the weekly timer
Perform this procedure to register the times at which the copier is to
be turned ON and OFF during each day of the week, or whether it will
be left ON or OFF all day on any of those days.
1
Select the day of the week that you want to set the ON and
OFF times for and then touch the "Change #" key.
The setting screen for the selected day will be displayed.
Inch specifications
Weekly timer
Weekly timer
Day of the week
Setting mode
Monday
08:30-ON 19:45-OFF
Tuesday
00:00-ON
Wednesday
03:00-OFF
Thursday
08:30-ON 19:45-OFF
Friday
All day-OFF
Default setting
Metric specifications
Week timer
Week timer
Day of the week
Setting mode
MondayTUESDAY
08:30-ON 19:45-OFF
Tuesday
08:30-ON 19:45-OFF
Wednesday
08:30-ON 19:45-OFF
Thursday
08:30-ON 19:45-OFF
Friday
All day-OFF
Default setting
2
If you want to set the time (hour and minutes) that the copier
will be turned ON and OFF during that day, touch the "Select
work time" key and then adjust the "SW ON" and "SW OFF"
times as desired.
Inch specifications
Monday
Set the timer to turn on main SW on/off in a day.
By selectiong "Cancel", set time is invalided once.
Select
SW ON
work time
All day
-OFF
All day
-ON
If On/Off mode is set at same time, main SW will turn off.
Default setting - Weekly timer
Metric specifications
Monday
Set timer to turn main SW on/off for one day.
By selecting "Cancel", set time is invalided once.
Select
SW ON
08:30
work time
All day
-OFF
All day
-ON
If On/Off is set to same time, main SW will turn off.
Default setting- Week timer
Up
Down
Change #
Up
Down
Change #
Back
8:30
SW OFF
19:45
Back
SW OFF
19:45
Close
Weekly timer
Off
On
Close
Week timer
Off
On
Close
Cancel
Off
On
Close
Cancel
Off
On
Advertisement
Table of Contents
