Copy Default Settings - Kyocera Mita KM-7530 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

(4) Copy default settings

The following table indicates the copy default settings available in this copier. Change any or all of the settings as desired in order to make the most
effective use of your copier.
Default setting
Exposure mode Selects between auto exposure and manual
exposure as the default copy exposure mode in the
initial mode.
Exposure adjustment Changes the incremental step to be used during
step adjustment of the copy exposure.
Original quality Determines the default setting that will be used for
the image quality in the initial mode.
Custom original size Sets the custom paper sizes (settings No.1 through
(setting No.1 – No.4) No.4) that can be used under the original size
selection mode.
Eco print mode ON/OFF Determines whether the Eco print mode will be the
default setting in the initial mode. In this case, the
amount of toner that is used to make the copies will
be reduced, and images will be printed out relatively
lighter than normal.
Black-line correction Turns black-line correction ON. If black lines
ON/OFF appear on copies when you feed originals from
the Document Processor (but they do not exist on
the originals themselves), this function will make
them less apparent.
Paper selection Sets whether the copier will automatically select the
same size of copy paper as the original once an
original is set (APS: auto paper selection mode), or
whether the drawer[cassette] selected "Default
drawer" ["Default cassette"] setting will be
automatically selected.
Paper type (auto Sets which types of paper can be selected under the
paper selection mode) auto paper selection mode.
* It is possible to select the type of paper that has
7-36
Description
been designated for the drawer[cassette] currently
in use.
Available settings
Manual / Auto Manual
1 step / 0.5 step 1 step
Text+Photo / Text / Text+Photo
Photo
Off / On Off
Inch specification – – –
Width: 2 – 11
5/8
(inches)
Length: 2 – 17 (inches)
Metric specification
Width: 50 – 297 (mm)
Length: 50 – 432 (mm)
On / Off Off
Off / On Off
APS / Default APS
drawer[cassette]
Off / On Off
Plain – – –
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 –
Custom 8
Factory Reference
setting page
7-40
7-41
7-42
7-43
7-44
7-45
7-46
7-47