Oce cm4010 System Settings Manual page 83

User Name Administrator
Login Name admin
(See the
Password
Safety
Guide.)*
Auth to: Login Locally
Page Limit Unlimited*
2
Authority* Admin
Favorites Following the System Settings*
*1 Items that can be changed.
*2 For detailed information of each of the settings, see
"List of settings and factory default settings of
template groups" (page 85).
Items stored
See the table below for the items that are stored.
Some items must be entered before the keys of other
items can be selected. Enter items whose keys can be
selected first.
Store the name of the user (max. 32
characters). This user name will be
used for the key name in the login
1
User Name* screen, the user name for document
filing, and the sender name. (More
than one user cannot have the same
user name.)
Touch this key to enter the stored
Applied to L/N
user name in the login name.
This determines where the user
name will appear in the user list. The
1
Initial*
first 10 characters of the user name
are automatically entered. (The
initials can be changed.)
Select the custom index. The custom
1
Index*
index names are shared with the
custom indexes of the address book.
Enter the login name used when
authentication by login
Login Name
name/password is enabled
(maximum of 255 characters). (The
login name must be unique.)
Enter the password used when
authentication by login
2
Password*
name/password is enabled (1 to 32
characters). (Can be omitted.)
Enter the e-mail address used in the
E-mail
sender list and for LDAP
Address authentication (maximum of 64
characters).
User Other User
users Other
1
users*
–
1
–
1
1
User* Guest*
1
My Folder
Auth to:
1
Page Limit
Authority
Favorites
*1 Entry of this item is required.
*2 When network authentication is used, an LDAP
password will be used and thus there is no need to
configure this setting.
• When "Authentication Method Setting" is set to
"Authenticate a User by User Number Only", the
items change as follows:
"Login Name" and "Password" change to "User
Number" (5 to 8 digits).
"Applied to L/N" does not appear.
"Auth to:" does not appear.
• For the procedure for entering text, see "6.
ENTERING TEXT" in the User's Guide.
82
A folder ("My Folder") can be
specified as the folder used by the
user for document filing. A previously
created folder can be selected or you
can create and select a new folder.
Select [Login Locally] or [Network
Authentication] (when LDAP is
enabled) for "Authenticate to:". If
[Network Authentication] is selected,
the LDAP servers stored in the Web
pages will appear. Select the server
that you wish to use for authentication.
Specify page limits for the user by
selecting one of the stored page limit
groups. The factory default setting is
"Unlimited".
For more information, see "Pages Limit
Group Registration" (page 83).
Specify the authority of the user by
selecting one of the stored authority
groups. The factory default setting is
"User".
For more information, see
Group Registration" (page 84).
Select one of the stored Favorite
Operation Groups to specify the
operation settings that will be applied
when you log in. The factory default
setting is "Following the System
Settings".
For more information, see "Favorite
Operation Group Registration" (page
86).
"Authority