Transaction Report Print Select Setting; Activity Report Print Select Setting - Oce cm4010 System Settings Manual

Transaction Report Print Select
Setting
This is used to select whether or not a transaction report
will be printed, and if printed, the condition for being
printed. Select a setting for each of the following
operations:
Single Sending
• Print Out All Report:
Print a report after each transmission.
• Print Out Error Report Only:
Print a report when transmission fails.
• No Printed Report:
Never print a report.
Broadcasting
• Print Out All Report:
Print a report after each broadcast transmission.
• Print Out Error Report Only:
Print a report when transmission fails.
• No Printed Report:
Never print a report.
Receiving
• Print Out All Report:
Print a report after each reception.
• Print Out Error Report Only:
Print a report when a reception error occurs.
• No Printed Report:
Never print a report.
Select the desired key in each setting screen and touch
the [OK] key.
When a transaction report is printed, you can have part
of the first page of the transmitted original printed on the
transaction report. For more information, see
Print on Transaction Report" (page 109).

Activity Report Print Select Setting

This is used to have the Image Sending Activity Report
stored in the machine's memory print at specified times.
When [Auto Print at Memory Full] is selected
activity report will automatically print when a combined
total of 200 transmissions and receptions is reached.
When [Print Daily at Designated Time] is selected
the activity report will automatically print at the specified
time each day. (Both settings can be selected
simultaneously.)
To enable either or both settings, select either or both
checkboxes . If [Print Daily at Designated Time] is
selected , keys will appear for you to specify the
time. Touch the "Hour" and "Minute" keys, set values for
each with the keys, and touch the [OK] key
when finished. (To make the number change quickly,
keep your finger on the
"Original
, the
or key.)
• If you only select the "Print Daily at Designated
Time" setting
transactions exceeds 200 before the specified time,
each new transaction will delete the oldest
transaction (the oldest transaction will not be
printed).
• The Image Sending Activity Report can also be
printed manually. See
(page 116) in the system settings (administrator).
Body Text Print Select Setting
Image files attached to Internet faxes are normally
printed. This setting can be enabled to also have the
e-mail body text (subject and message) printed.
This setting also applies to printing of the body text of
e-mail messages without file attachments.
To enable this setting, select the checkbox
touch the [OK] key.
A maximum of 5 pages of body text can be printed.
Pre-Setting Mail Signature
A signature can be automatically appended to the end of
the body text of e-mail. This is convenient when it is a
corporate policy to append a certain signature at the end
of e-mail.
The content of the signature is configured in the Web
pages. This setting simply enables or disables the
signature.
To enable this setting, select the checkbox
touch the [OK] key.
This setting is linked to
(page 108) in the Scan Settings.
,
110
and the number of recorded
"List Print (Administrator)"
and
and
"Pre-Setting Mail Signature"