Logging In To Your Wireless Router - NETGEAR WNR1000v3h2 User Manual

N150 Wireless Router User Manual

Logging In To Your Wireless Router

When the wireless router is connected to your network, you can access and configure the
router using your browser. The Default Access login information is printed on the bottom label
of your router.
To access the router:
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field
of your browser, and then press Enter. A login window displays
Figure 1. .
Tip: You can connect to the wireless router by typing either of these URLs in
the address field of your browser, and then pressing Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
If these URLs do not work, you must type the IP address of the router, for example,
http://192.168.1.1.
2. Enter admin for the router user name and your password (or the default, password).
Note: The router user name and password are not the same as any other
user name or password you might use to log in to your Internet
connection.
- The Checking for Firmware Updates screen appears unless you previously cleared
the Check for Updated Firmware Upon Log-in check box.
Chapter 1: Configuring Basic Connectivity | 7