NETGEAR WNR1000v3 - Wireless- N Router Installation Manual

Wireless-N 150 Router
WNR1000v3
Package Contents:
Wireless-N Router
WNR1000v3
Resrouce CD
Wireless-N Router
Ethernet Cable Power Adapter
Installation Guide Step 1:
Connect your modem.
Internet
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
Step 2:
Connect your router.
DSL or Cable
Modem
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
Step 3:
Connect your computer.
(not included)
Power on/off
Wireless-N Router
Step 5: Step 6:
Power on your router. Insert your CD.
Wait until the power LED Click Router Setup and follow
turns solid green. the steps to set up a secure
wireless network.
Note:
CD drive, see
on the back to complete your router setup.
Laptop or Desktop
Computer
Wireless-N Router
WNR1000v3
Resource CD
If your laptop does not have a
"No CD Drive" Installation