Table of Contents
Advertisement
Tip:
Before saving your configuration file, change the administrator password
to the default, password. Then change it again after you have saved the
configuration file. If you save the file with a new password, and then you
later forget the new password, you will have to reset the router back to
the factory defaults and log in using the default password of password.
This means you will have to re-enter all the router configuration settings.
Understanding Your Firewall
Your N150 Wireless Router contains a true firewall to protect your network from attacks and
intrusions. A firewall is a device that protects one network from another while allowing
communication between the two. Using a process called Stateful Packet Inspection, the
firewall analyzes all inbound and outbound traffic to determine whether or not it will be
allowed to pass through.
By default, the firewall allows any outbound traffic and prohibits any inbound traffic except for
responses to your outbound traffic. However, you can modify the firewall's rules to achieve
the following behavior:
•
Blocking sites. Block access from your network to certain Web locations based on Web
addresses and Web address keywords. This feature is described in
Internet Sites
on page 41.
•
Blocking services. Block the use of certain Internet services by specific computers on
your network. This feature is described in
page 42.
•
Scheduled blocking. Block sites and services according to a daily schedule. This feature
is described in
•
Allow inbound access to your server. To allow inbound access to resources on your
local network (for example, a Web server or remote desktop program), you can open the
needed services by configuring port forwarding as described in
Connections to Your Network
•
Allow certain games and applications to function correctly. Some games and
applications need to allow additional inbound traffic in order to function. Port triggering
can dynamically allow additional service connections, as described in
Triggering
on page 64. Another feature to solve application conflicts with the firewall is
Universal Plug and Play (UPnP), described in
40 |
Chapter 2: Safeguarding Your Network
Scheduling Blocking
on page 44.
on page 57.
N150 Wireless Router User Manual
Blocking Access to Internet Services
Allowing Inbound
Using Universal Plug and Play
Blocking Access to
on
Configuring Port
on page 66.
Advertisement
Table of Contents
Troubleshooting
