NETGEAR WNR1000v3h2 User Manual page 18

Figure 11.
7. Make sure that the Enable Wireless Router Radio, Enable SSID Broadcast, and Enable
WMM check boxes are selected.
8. Click Setup Access List.
9. Make sure that the Turn Access Control On check box is not selected.
10. Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that
you specified in the router, and disable encryption. Check that your computer has a
wireless link and can obtain an IP address by DHCP from the router.
Once your computer has basic wireless connectivity to the router, you can configure the
advanced wireless security functions of the computer and router (for more information about
security and these settings, see
18 | Chapter 1: Configuring Basic Connectivity
Chapter 2 ").
N150 Wireless Router User Manual