NETGEAR WNR1000v3h2 User Manual page 21

N150 Wireless Router User Manual
WNR1000v3h2
Note: Use these with other features that enhance security
Figure 1.
To configure the wireless network, you can:
• Manually specify your SSID and your wireless security settings. The WNR1000v3h2
router provides two screens for configuring the wireless settings:
- Wireless Settings. You access these under Setup in the main menu (see
Basic Wireless Settings
- Advanced Wireless Settings. You access these under Advanced in the main menu
(see Viewing Advanced Wireless Settings
• Use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement
WPA/WPA2 security on both the router and the client device. If the clients in your
network are WPS capable, you can use Wi-Fi Protected Setup (WPS) to automatically set
the SSID and implement WPA/WPA2 security on both the router and the client device
(see Using Push 'N' Connect (Wi-Fi Protected Setup)
Basic security options are listed in order of increasing effectiveness in
features that affect security are listed in
Wireless data
security options
Range: up to 300 foot radius
1) Open system: easy but no
security
2) MAC access list: no data
security
on page 24).
on page 29).
Table 2 on page 22. For more details on wireless
Chapter 2: Safeguarding Your Network
(Table
on page 30).
Table 1. Other
2).
Viewing
| 21