Logging In To Your Wireless Router - NETGEAR WNR612v2 User Manual

Wireless-N 150 Router WNR612v2 User Manual

Logging In to Your Wireless Router

You can log in to the wireless router to view or change its settings, and to access the
Knowledge Base and documentation.
To log in to the wireless router:
If you have not set up wireless connections yet, connect your computer to the wireless
1.
router with an Ethernet cable.
In the address field of your Internet browser,
2.
enter http://www.routerlogin.com.
To connect, you can also enter the modem
router's IP address, http://192.168.0.1.
The wireless router user name and password
are not the same as any other user name or
password you might use to log in to your
Internet connection.
Enter admin for the user name and your
3.
password (or the default, password
For information about how to change the password, see
on page 29.
Password
The screen that displays when you log in depends on whether the wireless router has
4.
already been set up.
Firmware Upgrade Assistant: If you log in after the wireless router has been
•
configured, this screen displays. See
Router Status screen: The wireless router Internet connection is not configured, or
•
the wireless router has been reset to its factory default settings. See
and Usage Statistics
Basic Settings screen: If there is no new firmware and your Internet connection is
•
configured, the Basic Settings screen displays. See
Your ISP Settings
If you do not click Logout, the wireless router will wait for 5 minutes after no activity
before it automatically logs you out.
).
Upgrading the Firmware
on page 38.
on page 10.
Chapter 1: Configuring Your Internet Connection
Changing the Administrator
on page 34 for details.)
Router Status
Viewing or Manually Configuring
| 7