NETGEAR WNR1000v3h2 User Manual page 71

N150 Wireless Router User Manual
3. In the QOS Priority Rule List, select an existing item, or you can scroll to the bottom of the
list and select Add Priority Rule.
a. If you chose to add a new entry, the screen expands as shown:
Figure 10.
b. In the QoS Policy for field, enter a descriptive name for the new application or
game.
c. Select the packet type, either TCP, UDP, or both (TCP/UDP), and specify the port
number or range of port numbers used by the application or game.
4. From the Priority drop-down list, select the priority that this traffic should receive relative to
other applications and traffic when accessing the Internet. The options are Low, Normal,
High, and Highest.
5. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
6. In the QoS Setup screen, select the Turn Internet Access QoS On check box.
7. Click Apply.
QoS for a Router LAN Port
To create a QoS policy for a device connected to one of the router's LAN ports:
1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen
displays, as shown in
2. Click Setup QoS Rule and then click Add Priority Rule.
3. On the QoS - Priority Rules screen, go to the Priority Category field, and select Ethernet
LAN Port from the drop-down list:
Figure 8 on page 69.
Chapter 5: Fine-Tuning Your Network | 71