Adding Guest Networks - NETGEAR WNR1000v3h2 User Manual

N150 Wireless Router User Manual
Note: When configuring the router from a wireless computer whose MAC
address is not in the Trusted PC list, if you select Turn Access
Control On, you lose your wireless connection when you click
Apply. You must then access the wireless router from a wired
computer or from a wireless computer that is on the access control
list to make any further changes..
8. Click Apply to save your Wireless Card Access List settings.
Now, only devices on this list can wirelessly connect to the WNR1000v3h2 router.
WARNING!
MAC address filtering adds an obstacle against unwanted access
to your network by the general public. However, because your
trusted MAC addresses appear in your wireless transmissions, an
intruder can read them and impersonate them. Do not rely on MAC
address filtering alone to secure your network.

Adding Guest Networks

Adding a guest network allows visitors at your home to use the Internet without having to
know your wireless security key.
To add a guest network, do the following:
1. Select Guest Network from the Setup menu. The Guest Network Settings screen
appears
Chapter 2: Safeguarding Your Network | 37