Guest Networks - NETGEAR WNDR3700v4 User Manual

Guest Networks

Adding a guest network allows visitors at your home to use the Internet without having your
wireless security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n
and 5.0 GHz a/n
To set up a guest network:

1. Select Basic > Guest Network.
2. Select any of the following wireless settings:
Enable this wireless network. When this check box is selected, the guest network is
enabled, and guests can connect to your network using the SSID of this profile.
Enable SSID Broadcast. If this check box is selected, the wireless access point
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt the
correct SSID for connections to this access point.
Allow guest to access My Local Network. If this check box is selected, anyone who
connects to this SSID has access to your local network, not just Internet access.
Enable Wireless Isolation. If this check box is selected, wireless computers or devices
that join the network can use the Internet but cannot access each other or access
Ethernet devices on the network.
3. Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the wireless devices in your network to use the guest network name
in addition to the main SSID.
4. Select a security option from the list. The security options are described in
Wireless Security Options
5. Click Apply to save your selections.
N600 Wireless Dual Band Gigabit Router WNDR3700v4
on page 32.
NETGEAR genie Basic Settings
31
Guest Network