Step 5, Size And Cut Duct Piece - GE Monogram ZV830 Installation Instructions Manual

Installation Instructions
INSTALLATI O N--R ECIRCU LATI NG
SIZE AND CUT DUCT PIECE
• Hold upper air deflector
with duct connector
against the ceiling.
• Measure from the bottom
of the air deflector to the
top of the hood as shown. Measure
educethat dimension by length
to facilitate installation.
The duct will cover
and overlap the deflector
and the hood outlets.
Duct
length
Deflector
• Cut the duct piece to size
and slip onto the bottom
of the deflector.
• Place the assembled deflector
and duct over the exhaust
outlet.
• Hold the assembly against
the duct bracket.
• Drive 2 screws into each side
of the bottom of the deflector
and into the bracket.
• Use duct tape to seal
duct to the deflector
and at the exhaust outlet.
16