Accessing The Web User Interface (Webui) - AT&T SB35020 User Manual

Syn248 SB35020 Deskset User's Guide

Accessing the Web User Interface (WebUI)

To access the WebUI:
1. Ensure that your computer is connected to the same network as the Syn248 system.
In most cases, your computer will already be connected to the network through the
PC port on the back of a Deskset.
2. On the Deskset, press MENU then 4 to display Deskset Information.
3. On the Deskset Information screen, find the IP Address.
4. On your computer, open an Internet browser. AT&T recommends Internet Explorer (7
or higher).
5. Type the Deskset IP address in the browser address bar, and press ENTER on your
computer keyboard.
6. A Login page appears.
7. Under Login Name, log in as a user by typing your extension number.
8. Enter your password if you have created one (see
Your Password" on page
9. Click
You can create or change your user password once you are logged in.

The Basic Settings page shown in

Web Interface
83). Otherwise, leave the password blank.
.
Changing a setting does not instantly apply the new value. Clicking
saves and applies all changes on that page.
"Setting, Changing, or Resetting
Figure 28 on page 90
88
Back to Contents
appears.