Table of Contents
Advertisement
Step 2: Create RAID Array
RAID arrays are created using the RAID controller's BIOS Boot ROM utility.
NVIDIA nForce4 4X
Power-on the system and wait for the RAID BIOS Setting utility message on
the screen. Press the "F10" key to enter its BIOS configuration utility.
Refer to Appendix B-1 for details about creating RAID array using this utility.
After the RAID array is created, press "F10" to exit.
Step 3: Prepare driver floppy
When installing Windows XP/2000/NT4.0 into any RAID disk, the O/S setup will
require a floppy disk containing the RAID driver. This step will show you how to
prepare this driver floppy. There are 2 methods to prepare this floppy:
Method 1
1. Insert the bundled CD into the CD-ROM drive
2. Boot the system from the CD-ROM
3. A menu of driver for various RAID controllers will appear
4. Insert a blank floppy into the A:drive
5. Select the appropriate RAID controller to begin copy into the floppy
Method 2
1. Locate another computer and insert the bundled CD into its CD-ROM drive.
RAID Configuration
Page 5-5
Advertisement
Table of Contents
