Record Setting - AVer EH1116H-4 Nano User Manual

- Port
The port for connection
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
6.1.3.3

Record Setting

In the Recording setup windows, click OK to accept the new settings, click Exit to exit without saving, and click
Default to revert back to original factory setting.
IP Camera
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns red when it is selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour
clock and the vertical block 1 to 7 represent the day in the week
block (Sunday to Saturday). To record in full 24 hours and 7 days a
week, select the recording mode and click the
to only record at a particular time or day, click Schedule button and
select the Recording Mode , and then click on the time or day
button. If you want
88