Table of Contents
Advertisement
number to view the camera signal on Remote Console screen. To select all the cameras, enable the ALL
check box.
6.2.2
Familiarizing the Buttons in PTZ Camera Controller
(6)
(7)
(8)
Name
(1) Close
(2) Setup
(3) AutoPan
(4) Focus +/-
(5) Zoom +/-
(6) Direction buttons
(7) Camera ID pane
(8) Camera lens
speed controller
(9) Camera preset
position number
(10) Group AutoPan
(9)
Function
Exit PTZ camera controller.
Select the PTZ camera to operate.
Operate the PTZ cameras automatically based on the selected camera group preset position
number.
Adjust the focus manually to produce clear image.
Zoom in and out the image.
Adjust and position the focal point of the PTZ camera. The direction buttons only support up,
down, right, and left direction.
Display the PTZ camera number that is being operated.
Adjust the moving speed of the PTZ camera lens.
Move the PTZ camera to the preset point.
Select to automatically operate PTZ camera in group.
(5)
(4)
(3)
(10)
100
(2)
(1)
(11)
Advertisement
Table of Contents
