AVer EH1116H-4 Nano User Manual page 42

Stream Setting: user can setup Codec, Resolution, FPS, Bitrate Mode, and Quality Bitrate of
Stream 2and Stream 3 on the selected IP camera channel. The Stream 1 is stetted in default.
Stream Selection: user can setup which stream (Stream 1 ~ Stream 3) to use on Record,
Preview(Quad and Single mode), and Remote site.
Video Adjustment: user can adjust Brightness and Contrast of IP camera.
The selection and adjustment items may vary by the camera supported.
I/O Control: Setup the sensor and relay that is embedded on the IP camera.
Sensor Setting
1. Click Sensor button.
2. Click the drop-down list and select the sensor ID number.
3. Enter sensor name in Name column
4. The system automatically detects the camera and input
relates information. In the Content section, enter sensor
Description.
5. In the test section, click Test to check the sensor status. Red
is high and Green is low.
6. Click OK to exit and accept the setting and Cancel to exit
without saving the setting.
36