Setting Up And Using The Emap - AVer EH1116H-4 Nano User Manual

2.2.1

Setting Up and Using the Emap

E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on the map.
To Set Up the Emap
1. Click Emap button.
2. When the Emap screen appears, click the area number (1 to 8 buttons) on where you want to insert the
map.
3. Click Load Map to insert the map. When the open dialog box appears, locate and select the map and click
Open.
4. When the inserted map appears on the Emap screen, click Edit. You may now drag the camera, sensor,
and relay icons to its place on the map. Icons on the map can be relocated anywhere. If you are going to
locate the icon on the map to other area, you need to drag the icon to the black pane at the bottom of the
Emap screen and then switch to the area on where you want to locate the icon. To bring all the icons back to
the black pane at the bottom of the Emap screen, click Reset Icon.
5. When you are done, click Save button to save the new setting. To exit Emap screen, click Close.
To Use the Emap
1. Click Emap button.
2. In the Emap screen, click the camera icon to switch on the area where the camera is located on the map
and to display the video at the upper right corner of the Emap screen. At the lower right corner of the Emap
screen, it lists all the warning message.
3. Click Close to exit Emap screen.
17
CHAPTER 2