AVer EH1116H-4 Nano User Manual page 57

Name
(12) Full screen
(13) Visual Search
(14) Find Next
(15) Event Search
(16) Intelligent Search
(17) Audio
(18) De-interlace
(19) Watermark
To verify the output video segment has not been modified. Click
Watermark verification windows will show up as following:
Function
View in full screen mode. To return, press the right button of the mouse or ESC on the
keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(see also
Chapter 3.6.3)
Search for the next event or changes in the motion detector frame. You can use this when you
are using Intelligent Search or Event Search function.
Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion,
Video Loss). (See also Chapter
Search the changes in the motion detector frame (See also
Enable/disable volume
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless
picture and select #2, if it captures lots of movement.
Green light: Pass the watermark verification.
Red light: Fail the watermark verification or this video doesn't have watermark
embedded.
i
Watermark verification doesn't support the video that is recorded from IP camera.
3.6.4)
51
CHAPTER 3
Click to exit from
full screen mode
Chapter 3.6.5)
to check the video.