To Search Using The Intelligent Search - AVer EH1116H-4 Nano User Manual

3.6.5

To Search Using the Intelligent Search

1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner of the
screen.
3.
When the Intelligent Search Setting dialog box and motion detector frame appear, you may adjust the
sensitivity bar and the motion detector frame size and location. To set motion detector frame size and
location, left click and drag on the screen. Then, click OK to start searching. The video search would stop at
the frame that matches the condition. To keep on searching click
all the result. Just check the List box. In the Search Duration section set the Begin Time and End Time.
Set the Searching Interval time that system won't list out the same events in a period of time that user has
setup. Then, click OK to start searching.
. You may also set to search and list
54