Table of Contents
Advertisement
1.6
Familiarizing the Remote Control Buttons
Use the Remote control to operate the DVR unit.
Name
(13)
Name
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Function
to enable FN modes (The word "Fn+" will show up in the left bottom
Press
corner on screen). To exit FN modes, press
+
: Switch to single screen display mode
+
: Switch to QUAD display mode
+
: Switch to 9 spilt screen display mode
+
: Switch to one single and 7 + 1 spilt screen display mode
+
: Enable/disable auto scan
Function
Switch to playback mode
Start/stop
recording
video.
authentication password is required.
To call out system setup menu.
To rewind the recorded video.
To start playback.
To pause playback.
To playback video at faster speed (1x ~ 32x).
To select the time and date of playback file.
Set a playing recorded video from A point to B point segment
and repeat playing on surveillance screen
To backup recorded video file to USB pen drive.
To reset alarm status.
Switch to Emap mode.
Call out PTZ control panel. Press
PTZ control panel.
9
CHAPTER 1
To
stop
recording,
again will close the
again.
the
Advertisement
Table of Contents
