AVer EH1116H-4 Nano User Manual page 74

Name
(6) Archive
(7) Status bar
(8) Camera ID
(9) Language
(10) Advanced
(11) Export
(12) Segment
(13) Full screen
(14) Visual Search
(15) Find Next
(16) Event Search
(17) Intelligent Search
(18) Sound /Sound bar
(19) De-interlace
Function
To select the video file source for playing.
– DVR Recorded File (HD): To playback the recorded video from the hard disk which was
recording video on the DVR system. (see also
–
Backup File(.dvr): The file is backup and save in *.dvr file format. (see also
4.3.3)
–
Backup File (.avf): The file is backup and save to external USB storage device in *.avf
format. Select the file source folder and click OK to playback (EH1116H-4 Nano doesn't
support *.avf file format).
Display the recorded date, time and play speed.
Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
To switch DVR application UI language.
Advanced function is including :
HDD Backup: to call out HDD Backup application. (see also
iEnhance: to call out iEnhance application. ( see also
AVF to AVI: save *.avf file format as *.avi file format.
HD eraser: This function doesn't support on EH1116H-4 Nano DVR.
Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format.
Print: Print the screen shot.
Output: Save the segmented file in *.avi format
Keep a portion of the recorded video (see also
Use the entire area of the screen to only display the video. To return, press the right button
of the mouse or ESC on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(see also
Chapter 4.3.5)
Search for the next event or changes in the motion detector frame. You can use this when
you are using Intelligent Search or Event Search function.
Search from the recorded activities that take place in the system (i.e., Sensor, Motion, Video
Loss, POS)(see also Chapter
Search the changes in the motion detector frame (See also
- Turn on and off the sound
Increase and decrease the volume
-
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.
Chapter
Chapter
4.3.6)
68
4.3.2)
Chapter
Chapter 4.3.4)
Chapter 6)
4.3.1)
Chapter 4.3.7)