Table of Contents
Advertisement
- Description
Add a short comment
(5) IP Camera Information
To setup IP camera and display current IP camera information.
Use IP Camera Motion: Enable to use the motion detection function of IP camera if the IP camera has
support motion detection and the motion recording will based on IP camera's motion detection setting.
IP Setting: Click Add IPCam to setup and connect the IP camera.
1. Click the radio button of Protocol to enable the setup of IP camera.
2. Select the Protocol, Model, Video Format, and Channel of the IP camera.
3. User also can click Search Devices button to find the IP cameras that can be detected on your LAN
network.
4. Enter IP address and connecting port in IP Camera Site column.
5. Also, user can enter URL of IP camera instead of IP address.
6. If the IP camera has authority request, please enable Authentication and enter ID and Password.
7. Click OK to connect with the IP camera.
Detail: The setting of advanced IP cameras are related to the Intelligent Streaming function in System
setting. Click Default will back to the factory default value.
The Detail setting only support for the AVer
TM
SF1311H IP camera.
35
CHAPTER 3
Advertisement
Table of Contents
