Configuration/Programming; Codes/Symbology Options - Hand Held Products Quick Check 200 Series User Manual

4. Configuration/Programming

®
The Quick Check 200 Series auto-recognizes or "autodiscriminates" seven bar
code symbologies - - Codabar, Code 39, Interleaved 2/5, EAN/UPC, Code 128,
MSI Code and Code 16K - - or alternately can check that symbols conform under
any or all of several applications specifications; AIAG, BOOKLAND, CCBBA,
Comp Tia/CTIA, SCC, SISAC, U.P.C.-COUPON CODE, dependent upon the
QC200 Model. The QC200 also has a number of operator selectable test and
configuration options. The QC200 user can program their unit for all of these
options in two distinct ways. One is by simply scanning a specialized Code 128
called a Command Code. Predetermined Command Codes were used in the
QC200 Quick Start section of this manual and are explained in a later section.
The QC200's options can also be programmed manually.
The "heart" of the operation and manual programming of the Quick Check
Series is centered around its "Select" and "Scroll" buttons. All functions with the
QC200 are controlled by their use. Generally, pressing the Select [0] Button
moves the user from menu "level" to menu "level". Pressing of the Scroll [<>]
Button allows the user to pick an option within these levels. At the end of the
manual are menu "flow charts" of the QC200 menu sequences. An explanation
of what programmable selections are available follows.

Codes/Symbology Options

®
The Quick Check 200 Series symbology selection configuration is set and
controlled from within the QC200's programming menu structure, this is entered
after power up by pressing the Select [0] Button two times as demonstrated
through the next steps:
On power up, [Qc2xx aa/lll] is displayed.
If you press the Scroll [<>] Button the results of the last scan is displayed (the
QC200 always stores the last sample scan). If you press the Select [0] Button
the following is displayed:
[Reflectom'r>]
This is the QC200's static Reflectometer option, which is described later in this
manual. Pressing the Select [0] Button again bypasses this and changes the
LCD to:
®
200
13