Hand Held Products Quick Check 200 Series User Manual page 36

Printout Samples
All of the measurements obtained during a measurement scan are saved in a
temporary buffer. When a printer is not connected those measurements can be
transferred to a 20-scan print buffer as described above. When a printer is
attached and powered, it produces a listing of full measurement details. From a
QCP or QCHSP, the printout would look similar to the following
30
®
\\\Quick Check 200\\\
660 nm, 06 mil Scanner
UPC-A: 100% Mag. Factor
021200074424
Avg Bar Err = +.04X OK!
DecodeMargin = 92% <A>
Symbol Total = 095 "X"
Prnt Contr Sig = 94% OK!
Reflect (Light) = 75% OK!
Reflect (Dark) = 03% OK!
Symbol Contrst = 72% <A>
R(min)/R(max) = 04% <A>
Modulation = 79% <A>
EdgeContr(min) = 57% <A>
"Defects" = 05% <A>
Message Length = 11 OK!
Check Charctr Passes OK!
Traditional Tests <PASS>
Bar Growth: IN TOL (+)
"P C S" – OK
Traditional Tests - PASS -
Format Tests - PASS -
ANSI Parameters <A>
Dimension Checks <P>
Format Checks <P>
Profile QualityGrade <A>