Model Selections; Tests" Options - Hand Held Products Quick Check 200 Series User Manual

SISAC [ - SISAC - >] – Serial Coding applications
U.P.C. [ Coupon Code >] – Coupon Coding applications
If additional user information must be input when an application is selected, the
user will be prompted to do so after the Select button [0] has been pressed.
Those applications need additional input follow:
AIAG the user must indicate whether they are the "supplier" of the bar code or
the "customer" receiving the bar code (the AIAG application specification adjusts
acceptance criteria accordingly).
[AIAG Custmr >] or [AIAG Supplr >]
Pressing the Select [0] Button accepts the choice, the Scroll [<>] Button
bypasses.
SCC This application requires the entry of a magnification factor for the
Interleaved 2/5 symbols to be tested (thereby setting appropriate tolerances!).
The user steps through the choices (>75%, 74%, 70%, 66%, 62%, 58%, 54%,
50%) using the Scroll [<>] Button. Selection is made using the Select [0] Button.
BOOKLAND As with the UPC/EAN/JAN codes mentioned earlier, the Bookland
codes (which are based on those symbols) require input of a magnification factor.
Again, the possible choices are .80, .85, .90, .95, 1.0, 1.2, 1.4, 1.6, 1.8 or 2.0 and
are cycled through by repeatedly pressing the Scroll [<>] Button. Default is 1.0
or 100%.

Model Selections:

QC200 – Symbologies only
QC210 – Retail Model. Symbologies plus retail/book industry applications.
(SCC;BOOKLAND;SISAC)
QC220 – Health Model. Symbologies plus health industry applications.
(SCC;HIBSS;CCBBA)
QC230 – Industrial/Government Model. Symbologies plus
industrial/government.(LOGMARS;AIAG;ABDC/CTIA;SCC)
QC250 – All Industry Applications plus Symbologies

"Tests" Options

After Power up and pressing the Select [0] Button three times, you are brought to
the "Test" Programming Sections:
17