Hand Held Products Quick Check 200 Series User Manual page 38

For the QCP and QCHSP:
***************************
***************************
And from the QCSSP:
*****************************************************
****
Symbol Quality Grade: Avg 3.0 = > B/06/660
*****************************************************
****
Each result shown in the printout is information also available on the display as
previously described. Having the wrong printer setting, if encountered, may
cause printing difficulties. This is set within the "Config." Menu as explained
previously.
Printing can also be initiated in either a single ("on demand") or continuous
("auto-print") print mode by use of the Printer Control Command Codes found
later in this manual.
NOTE: Printing can be halted after starting by momentarily pressing the
POWER button on the QC200. Printing will stop as soon as the printer's internal
buffer is clear.
32
* Symbol Quality Grade *
* Avg 4.0 = > A/06/660*