Hand Held Products Quick Check 200 Series User Manual page 40

locate the Special Features Bar Code Menu in the back of this manual. On this
Menu sheet are two codes, Command Code "Unlocked" and Command Code
"Locked". Scanning either will result in the Quick Check
specialized code 128 you can use for rapid one step programming of your
QC200.
The Command Code "Locked" code allows the user to add a feature to the
Command Code that will "lock" the menu programming after that code is scanned
the first time. This prevents access to reprogramming of the unit by the casual
user. The "lock" can not be removed unless the user scans another, previously
prepared, Command Code that does not have the "lock" function in it, such as
the "reset" Command Code supplied in this manual. (NOTE: Before actually
using this code, label it along the line provided with a description and make a
copy of it on your office copier. This helps improve the bar code quality. Making
a "reduced size" copy will help also.)
These codes are also produced by Hand Held Products. Contact Customer
Administration at Hand Held Products about this service. It will be necessary to
make the following selections;
OPERATING MODE
Extended Accuracy (8-Scan/Scan path average)
ON(ExtendAccur) or OFF(NormalAccur)
Decodability (choose one)
Hand Held Products' Decodability Margin (Avg DMargin)
ANSI's (Decodability)
Pass/Fail Criteria (choose one)
"Traditional" P/F (Trad'l P/F) or
ANSI Grades – D, C, B, or A
ANSI Grading by LETTER or NUMBER (choose one)
Letter Grades (Ltr.Grades)
Number Grades (Num. Grades)
Program Menu Lock
On or Off
Reflectometer Mode
On or Off
34
®
Printer printing the