Printer Printout Samples - Hand Held Products Quick Check 200 Series User Manual

Portable and compatible with all major bar code symbologies

Table of Contents

6. Printer Printout Samples

[Store Data?>]

When a printer is not attached or is turned off, you are asked if you wish to store

the measured results in a 20-scan print buffer. Pressing the

Scroll [<>] Button will store the scan. The buffer's contents can later be dumped

to the printer. When a QC200, that has stored data, is hooked to a printer and

the QC200 is then turned on, the first display will be a query on whether or not to

dump the stored information. NOTE: The QC200 will also "see" the QCAC

Charger as a "printer" when it is connected.

[Print Data?>]

When a printer is attached to the Quick Check® 200, you are asked if you wish to

print the most recent scan. Pressing the Scroll [<>] Button will cause the current

testing results to be printed and the following display will show:

[ - Busy ! - ]

NOTE: Printing can be halted after starting by momentarily pressing the POWER

button on the QC200. Printing will stop as soon as the printer's internal buffer is

clear.

Table of Contents