Chip Trays & Splash Guard; Feed Stop - Grizzly G0592 Owner's Manual

Chip Trays & Splash
Guard
Components and Hardware Needed: Qty
Upper Chip Tray ................................................ 1
Lower Chip Tray ................................................ 1
Splash Guard .................................................... 1
The upper chip tray needs no hardware and rests
on the vise and vise base as shown in Figure
11.
The lower chip tray rests on the base directly
under the upper chip tray. It is not secured so it
can be removed for easy clean-up.
Figure 13. Feed stop.
Figure 12. Splash tray installation.
-18-
G0592 Metal Cutting Bandsaw