Glass Removal (& Installation) - FireplaceXtrordinair 35 Custom Builder Owner's Manual

Finalizing the Installation
2 4
1 Remove the face (see page 13 or 14). Remove the glass assembly following the directions below.
Warning: The appliance must be completely cool before removing the glass.
Warning: To prevent damage, do not abuse, strike, or slam the glass frame.
Swing the glass frame outwards then lift the it
c
up and off the tabs at the top of the firebox.
Travis Industries
Note on Arch Covers (both sides)
The arch
covers
(included in
the owner's pack)
block light from
exiting the scroll
work on arched faces.
The covers hang on the glass
frame. After replacing the glass,
hang the arch covers over the glass frame
before attaching the face.
The glass
frame hangs
on tabs
above the
firebox.
a
Insert the included
glass latch tool into
the hole on the
glass frame latch.
Glass
Frame Latch
b
Pull the latch out then
down to detach it from
the glass frame.
Glass Replacement
Hang the glass assembly on the tabs at the top of the
firebox. Secure the glass frame with the latches.
9 3 5 0 8 1 1 6
(for qualified installers only)
Arch Cover
Glass
Glass
Glass Frame
0 3 1 0 0 0