To Replace The Power-Line Fuse (34410A/11A) - Agilent Technologies 34410A Service Manual

2 Quick Start

To Replace the Power-Line Fuse (34410A/11A)

Remove power cord first. Then follow these steps:
Verify that the correct line voltage is selected and the power-line fuse is
good.
For multimeter operations with a 230 VAC supply, set the line–voltage selector to 220V.
N O TE
50
Depress tab (1) and pull fuse holder (2) from
rear panel.
Rotate line-voltage selector and reinstall so
correct voltage appears in fuse holder window.
Remove line-voltage selector from fuse
holder assembly.
Agilent Part Number 2110-0817
(250 mA, 250V, slow-blow, 5x20mm)
Replace fuse holder assembly in rear panel.
34410A/11A/L4411A Service Guide