Repackaging For Shipment; Cleaning; To Replace The 34410A/11A Power Line Fuse - Agilent Technologies 34410A Service Manual

4 Disassembly and Repair

Repackaging for Shipment

If the unit is to be shipped to Agilent for service or repair, be sure to:
• Attach a tag to the unit identifying the owner and indicating the
• Place the unit in its original container with appropriate packaging
• Secure the container with strong tape or metal bands.
If the original shipping container is not available, place your unit in a
container which will ensure at least 4 inches of compressible packaging
material around all sides for the instrument. Use static–free packaging
materials to avoid additional damage to your unit.
Agilent suggests that you always insure shipments.

Cleaning

Clean the outside of the instrument with a soft, lint–free, slightly
dampened cloth. Do not use detergent. Disassembly is not required or
recommended for cleaning.

To Replace the 34410A/11A Power Line Fuse

The power line fuse is located within the multimeter's fuse–holder
assembly on the rear panel (see
factory with a power–line fuse installed. The supplied fuse is a 250mA, 250V,
slow–blow, 5x20mm fuse, Agilent part number 2110–0817. If you determine
that the fuse is faulty, replace it with one of the same size and rating.
106
required service or repair. Include the model number and full serial
number.
material for shipping.
page 50). The multimeter is shipped from the
34410A/11A/L4411A Service Guide