Chapter 10 Parameters And Defaults - Denso QK20-R User Manual

Chapter 10 Parameters and Defaults

The tables below list the parameters and their defaults. Those parameters can be changed with the QR-coded
parameter menu or configuration software (ScannerSetting_2D), except shadowed ones only with the configuration
software.
When the scanner leaves the factory, all of these parameters are set to defaults.
(1) Reading mode related parameters
Items
Data edit
Period of double-read prevention
High-speed PDF417 scanning
(2) Interface to the host
Items
Interface
(Note 1) Selecting the USB keyboard interface disables access to the configuration software (ScannerSetting_2D).
Parameters
Non-edit mode
Data extraction mode
Data conversion (substitution)
mode
Data blocksorting mode
ADF script mode
Double-read enabled
Period of double-read prevention
0.1 to 9.9 seconds
Disable
Enable
Parameters
USB-COM interface
USB keyboard interface (Note 1)
59
Defaults
√
0.5 s
√
Defaults
√
: Can be changed only with the configuration software.
Refer to:
Section 7.1
Chapter 4
Section 7.4
Refer to:
Chapter 2