Denso QK20-R User Manual page 29

Extraction start and end positions
"Extraction start position"
Head position
Tail position
nth position
The n can be 1 through 9999. Note that if the extraction start position is specified as nth position, the extraction end
position should be equal to or greater than the extraction start position.
Note: The number of characters for Code 39 symbols should be specified including start and stop codes.
Example Code read: QR Code, Data: 12345,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Type 1,
Transmission of the number of digits: Enable, Prefix/Suffix: None, BCC: Disable
Extraction conditions
"Code type": QR Code
"Data transfer
regardless of error
result": Prohibit
"Code type": QR Code
"Data transfer
regardless of error
result": Permit
"Code type": PDF417
"Data transfer
regardless of error
result": Prohibit
"Code type": PDF417
"Data transfer
regardless of error
result": Permit
"Extraction end position"
nth position
Tail position
By n positions from the start position
nth position
Extraction start position
Head position
Tail position
1st position
1st position
2nd position
Head position
Tail position
6th position
6th position
1st position
Head position
Tail position
6th position
6th position
1st position
Invalid if specified.
Invalid if specified.
18
Extraction end position
3rd position
3rd position
Tail position
By 3 positions
4th position
6th position
6th position
Tail position
By 10 positions
6th position
6th position
6th position
Tail position
By 10 positions
6th position
Invalid if specified.
Invalid if specified.
Output data
[STX]Q0003123[ETX]
[STX]Q0003345[ETX]
[STX]Q000512345[ETX]
[STX]Q0003123[ETX]
[STX]Q0003234[ETX]
Error
Error
Error
Error
Error
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
Error
[STX]Q000512345[ETX]