Denso QK20-R User Manual page 78

Items
Reading SQRC
Encryption key mismatch
Encryption key control
Reading iQR Code (Square)
iQR Code (Square),
minimum code number readable
iQR Code (Square),
maximum code number readable
Reading iQR Code (Rectangular)
iQR Code (Rectangular),
minimum code number readable
iQR Code (Rectangular),
maximum code number readable
Reading Aztec (Full Range)
Reading Aztec (Compact)
Aztec (Full Range),
minimum code number readable
Aztec (Full Range),
maximum code number readable
Aztec (Compact),
minimum code number readable
Aztec (Compact),
maximum code number readable
(Note 3) Using the QR-coded parameter menu enables or disables scanning of both Full Range and Compact Aztec symbols
at the same time.
Parameters
Enable
(SQRC and QR Code symbols)
Enable
(SQRC symbol only)
Disable
Permit scan data transmission only
Transmission prohibited
Back-up permitted
Back-up prohibited
Enable
Disable
1 to 61
Enable
Disable
1 to 15
Enable
Disable
Enable
Disable
1 to 32
1 to 4
67
Defaults
√
√
√
√
1
61
√
1
15
√
√
1
32
1
4
: Can be changed only with the configuration software.
Refer to:
Section 7.7
Section 11.3
Section 11.3
(See Note 3.)
Section 11.3